Flooring contractor in Brentwood, CA - garage and shop floors made for hot summers
Sterling Antioch Concrete Coatings is a flooring contractor based in Antioch that coats, polishes and resurfaces concrete floors in Brentwood, from attached garages and home gyms to shops, kitchens and pool decks.
- Licensed and insured.
- Free on-site estimates.
- Replies within 1 business day.
Brentwood garages, shops and backyards
Most of what I look at in Brentwood is newer subdivision housing, the kind with a two- or three-car garage on a slab and, a lot of the time, a pool out back. Closer to downtown you get older homes and a mix of storefronts, restaurants and small shops, so our calls here run from family garages to commercial floors. We're a flooring contractor in Antioch, CA, which puts Brentwood a short drive away, and it's the same work we do in Oakley next door and over the hill in Walnut Creek.
Newer slabs usually start out in better shape than old ones, but that doesn't make them ready to coat. Builders often leave a curing compound or sealer on garage concrete that a coating can't grip, so we grind every floor down to open concrete and test it before we talk about colors.
Our services in Brentwood, CA
- Garage Floor Coatings
Many Brentwood homes have big attached garages that double as a gym or workshop. We grind and test the slab, then lay a coating built for how you use it.
- Polyaspartic Floor Coatings
Brentwood garage doors stay open to a lot of afternoon sun, which yellows some epoxy topcoats. Polyaspartic holds its color in sunlight, so we often finish with it.
- Urethane Cement Flooring
Restaurant kitchens and food spaces around Brentwood get hot-water washdowns that are hard on ordinary epoxy. We install urethane cement flooring, which handles heat, moisture and constant cleaning.
- Pool Deck Coatings & Resurfacing
Backyard pools are common here, and older deck concrete gets rough, stained and hot underfoot. We resurface or coat the deck with a textured finish that's easier on bare feet.
- Polished Concrete Flooring
Shops, showrooms and storefronts in Brentwood often sit on bare slabs that dust and stain. We grind and polish the concrete itself, so there's no coating to peel later.
- Concrete Floor Stripping & Removal
Plenty of Brentwood garages have a store-bought kit peeling up in patches. We strip it to clean concrete first, because a new coating won't bond well over a failed one.
What Brentwood heat and slabs ask of a floor
Summers out here are hot and dry, and at nearby Round Valley Regional Preserve temperatures commonly pass 100 degrees. A hot slab makes a coating set faster and can push air up out of the concrete into the wet coat, so on hot days we usually start early, mix smaller batches and check the slab temperature before we roll anything.
Most houses here sit on slabs poured right on the ground, and moisture coming up through the concrete is behind a lot of the failed garage coatings I see. I can't tell how much is coming through by looking, so I'd want to test that first, and the result decides which primer and system go down. Your price mostly follows the size of the floor, how much grinding and crack repair it needs and the system you choose, while the schedule turns on cure times and what that test shows, and the written estimate I leave you puts it in your own numbers.
Get a written estimate for your Brentwood floor
We reply to every call and message within one business day, and the on-site estimate is free with no obligation. I come out to Brentwood myself, look at the slab, ask how the space gets used and leave you a written estimate. If you go ahead, I run the job with our crew.
Coated and polished concrete floors
Brentwood flooring questions answered
Does a flooring contractor in Brentwood need a California contractor license?
In most cases yes, because California's Contractors State License Board requires a license for anyone who builds or alters a structure when the job needs a building permit, uses employees or totals $1,000 or more. The small-job exception covers only work under $1,000 in labor, materials and everything else combined, with no permit and no employees, and a bigger job can't be split into pieces to get under that line. A contractor has to hold the license before bidding, and we're licensed and insured.
Does the Brentwood business license application ask for a contractor's state license?
Yes, the City of Brentwood's business license application asks for state license information, such as a contractor license. It wants the license number, the license type, the expiration date and verification of the license, so the city sees the same state license you'd ask a contractor about.
How much can a contractor ask for up front on a home floor job in Brentwood?
No more than $1,000, and less than that on a smaller contract, under the state board's cap on home improvement down payments. Any other payments have to be listed clearly in the contract and based on work completed or materials delivered to your home. The board says those rules apply to all home improvement projects.
How do I know which building code applies to a floor job in Brentwood?
Every building in California falls under the statewide building code, Title 24, along with state agency amendments and any ordinances the city adopts. If your job calls for a permit, I tell you at the estimate and we settle who gets it before work starts. If I'm not sure, I check with the city or county building office first.
How do I check flood maps for my Brentwood address?
Start with FEMA's flood map viewer, which FEMA calls the best place to begin for its official flood hazard determinations, and search your own area there. It's worth a look before you choose a floor for a garage or ground-level room, and you can bring what you find to the estimate.
What affects the cost of a garage floor coating in Brentwood?
The size of the floor, the shape the slab is in and the system you pick move the price most. A slab with an old peeling kit, deep cracks or a moisture problem takes more grinding, repair and primer before any color goes down, and a full flake or metallic system costs more than a simple sealer. I'll put your figure in a written estimate once I've seen and tested the floor.